To disassemble and repair 1-1/2″, 2″, and 3″ pumps, you will need…
- 3/8″ wrench or socket
- 7/16 wrench or socket
- regular screw driver
- Phillips screw driver
- 1/2″ wrench or socket
- 7/16″- 14 bolt to take off impeller
After the pump is disassembled, make sure to clean all reusable parts. Be careful with the seal as they are ceramic and can break easily. If you need to replace any parts, please reference our Banjo Catalog. To prevent a damaged pump, make sure you filter the material before entering the pump. Also, avoid running the pump dry as this will decrease the life of the seal.
Be sure to Contact Us with any other pump servicing questions!