Roller Pumps

Performance Information:

  • Max. flow: 7 gpm/26.5 lpm at 2600 rpm
  • Max. pressure:
    • Continuous 100 psi/6.9 bar
    • Intermittent 150 psi/10.3 bar
  • Max. rated speed: 2600 rpm
  • Max. fluid temperature: 140°F/60°C
  • Housing and Rotor Material Options
  • Cast Iron housing and rotor are intended for use in common agricultural spraying applications – compatible with most insect, pest, brush and weed control chemicals
  • Ni-Resist housing and rotor provide improved corrosion resistance over cast iron models – compatible with all of the above, PLUS fumigants, powdered and liquid fertilizers
  • Silver Series XL housing and rotor provide the best corrosion resistance and are ready for use with Roundup® – compatible with all of the above, PLUS glyphosates and acids

Recommendations for Applications

CAST IRON, NI-RESIST or SILVER SERIES XL®
Series 4101 4-Roller
PART NO Max GPM MAX PSI MAX RPM SHAFT OUPUT
4101C 7.2 150 2600 5/8” SOLID SHAFT
4101C-H 7.2 150 2600 1/2” HOLLOW SHAFT
4101N 7.2 150 2600 5/8” SOLID SHAFT
4101N-H 7.2 150 2600 1/2” HOLLOW SHAFT
4101XL 7.2 150 2600 5/8” SOLID SHAFT
4101XL-H 7.2 150 2600 1/2” HOLLOW SHAFT
CAST IRON, NI-RESIST or SILVER SERIES XL®
Series 6500 6-Roller
PART NO Max GPM MAX PSI MAX RPM SHAFT OUPUT
6500C 21.8 300 1200 5/8” SOLID SHAFT
6500N 21.8 300 1200 5/8” SOLID SHAFT
6500XL 21.8 300 1200 5/8” SOLID SHAFT
CAST IRON, NI-RESIST or SILVER SERIES XL®
Series 7560 8-Roller
PART NO Max GPM MAX PSI MAX RPM SHAFT OUPUT
7560C 22.5 300 1200 15/16” SOLID SHAFT
7560N 22.5 300 1200 15/16” SOLID SHAFT
7560XL 22.5 300 1200 15/16” SOLID SHAFT
CAST IRON, NI-RESIST or SILVER SERIES XL®
Series 7700 7-Roller
PART NO Max GPM MAX PSI MAX RPM SHAFT OUPUT
7700C 22.1 200 800 15/16” SOLID SHAFT
7700N 22.1 200 800 15/16” SOLID SHAFT
7700XL 22.1 200 800 15/16” SOLID SHAFT
CAST IRON, NI-RESIST or SILVER SERIES XL®
Series 1700 5-Roller
PART NO Max GPM MAX PSI MAX RPM SHAFT OUPUT
7700C 45 200 1000 15/16” SOLID SHAFT
7700N 45 200 1000 15/16” SOLID SHAFT
7700XL 45 200 1000 15/16” SOLID SHAFT
CAST IRON, NI-RESIST or SILVER SERIES XL®
Series 1502 6-Roller
PART NO Max GPM MAX PSI MAX RPM SHAFT OUPUT
1502C 62 200 1000 15/16” SOLID SHAFT
1502N 62 200 1000 15/16” SOLID SHAFT
1502XL 62 200 1000 15/16” SOLID SHAFT
Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety of fluids. These include insecticides, herbicides, emulsives, aromatic solvents, liquid fertilizers and many other liquids. The economical rotary-action roller principle requires no check valves while providing positive displacement characteristics with less friction and lower starting torque than other pumps. Construction features include a cast-iron, Ni-Resist or SilverCast™ body and rotor, and 416 stainless steel shaft, sealed factory-lubricated ball bearings, and cartridge-type lip seals of Viton or Buna-N. Super Rollers, which feature the life of polypropylene and the chemical resistance of nylon, are also standard. Rotation for the 4001 series is clockwise for easy adaption to electric motors and gas engines. Pumps are available in reverse rotation. The 4101 series, 4 roller, pump achieves up to 7 gpm (26.5 lpm) and 150 psi (10.3 bar). The series includes models 4101C-A, 4101N-A, and 4101XL-A.